|
The Procash 6100 automated teller safe runs on a cash recycling basis that allows financial institutions to provide reliable cash deposit/-dispensing functions in open-plan customers zones. This supports the trend toward flexible branch design. The Procash 6100 is an under-counter model with a small footprint that can easily be installed beneath a bank counter.
Procash 6100 enables financial institutions to eliminate expensive security facilities such as reinforced glass and other bullet-proofing. This increases the flexibility of bank staff by simplifying and accelerating cash transactions, thus giving staff more time to advise customers.
With its closed cash cycle, the Procash 6100 makes sure that deposited banknotes can be used again immediately for dispensing transactions. A counterfeit note detection module stops any forgeries from entering cash cycle. The fact that deposited cash is dispensed again means the time-consuming post-processing of deposit transactions after business hours is no longer necessary.
The amount of cash in the ProCash 6100 can be reduced to a minimum because this system is constantly replenished with deposited money. Tellers can also refill the system with bundled banknotes from the vaults during business hours if necessary. The ProCash 6100 is operated with either 6 or 8 drum modules that are located in a safe certified in accordance with CEN/VdS 111 or UL 291 Level 1. Cash can also be kept in these certified safes outside business hours.
Technical data
The ProCash 6100 meets German UVV security and safety standards. The KM 48 P is used as an interface to connect a robbery alarm system with a direct link to a police emergency call system.
The risk of robbery or potential loss are reduced substantially by the ProCash 6100, because cash stores are not visible. Furthermore, the software ensures that the amount of cash that can be dispensed within a certain period is limited and cannot be influenced by the user.
The electronic lock incorporates a 10-minute delay until the main lock is released - a future required for safes based on German UVV standards. To comply with the principle of double-control, the ProCash 6100 has an additional key-based lock.
Dispensing transactions on the ProCash 6100 can be processed for two tellers simultaneously with the aid of indicator lights on the output tray at the front.
The ProCash 6100 features two V.24 ports and can be operated as an independent cash deposit/dispensing system with either one or two PCs.
|
OUTPUT UNIT |
· Bundle output of up to 100 banknotes
· Output at the center (front) |
|
INPUT UNIT |
· For up to 8 banknote denominations
· Bundle input of up to approx. 200 banknotes |
|
BANKNOTE RECOGNITION |
Authenticity check (all counterfeit bills now known are identified, error-free) |
|
DRUM MODULES |
6 or 8 drum modules up to 350 notes each |
|
DEPOSIT UNIT |
· 2 cassettes as an option for manual deposits |
|
SEPARATING RATE |
· Dispensing 5 banknotes per second
· Deposit 4 banknotes per second |
|
MINIMUM/MAXIMUM BANKNOTE SIZE |
· 60 mm x 110 mm / 85 mm x 185 mm
|
|
SECURITY HOUSING |
· Safe according to CEN Security level CEN/VdS III (EN 1143)
· Safe according to UL Security level: UL 291 Level 1
Both housing are prepared for installation of alarm sensors |
|
LOCKING SYSTEM |
· Electronic lock incl. 10-minute delay in accordance with German UVV security and safety standards
· Keyoperated lock in addition |
|
DATA COMMUNICATION INTERFACES |
2 x V.24 |
|
SOFTWARE REQUIREMENTS |
WOSA/XFS
· OS/2 V3.0 Warp or WIN NT 4.0 <
· ProDevice/FO (OS/2 or WIN NT)
· V2.0 and above
· Optional: ProAKT/Autark
· (OS/2 or WIN NT) V1.0 and above |
|
HARDWARE INTERFACES |
2 RS-232-C (V.24/V.28) interfaces |
|
ELECTRICAL SPECIFICATIONS |
Voltage: 110-120 V ~ / 220-240 V ~, 50-60 Hz Power input: 240 W |
|
AMBIENT CONDITIONS |
Temperature / Rel. humidity
· Operation: +15°C to +35°C / 10 % to 75 %
· Storage: + 5°C to +40°C / 5 % to 85 %
· Transport: +25°C to +60°C / 15 % to 98 % |
|
DIMENSIONS |
|
|
Height |
Width |
Depth |
|
with UL 291 Level 1 safe |
670 mm 26.38 in |
775mm* 30.51 in* |
500 mm 19.69 in |
500 mm* 19.69 in* |
850 mm 33.46 in |
880 mm** 34.64 in** |
|
with CEN/VdS III safe |
685 mm 26.97 in |
790 mm* 31.10 in* |
500 mm 19.69 in |
500 mm* 19.69 in* |
850 mm 33.46 in |
880 mm** 34.64 in** |
* dimensions with input unit
** dimensions with deposit unit |